How to connect a dishwasher with your own hands?

The purchase of a dishwasher is often associated with the offer of a specialist who will connect this machine to you. Sellers who are interested in imposing often unnecessary services on the buyer scare that this is an extremely complex process. However, connecting a dishwasher with your own hands is nothing complicated. This work can be done by a man who has the simplest set of tools and whose hands have grown from where you need to. This article will help you figure out how to hook up your own dishwasher and save money.

Important! Care must be taken when working. Flaws and mistakes lead to the fact that, at best, you will be bothered by leaks, and at worst - your equipment will become worthless. You cannot count on warranty repairs, since there is an incorrect connection of dishwashing equipment.

to contents ↑

BOSCH dishwasher installation location: features of choice

Before you begin to deal with the connection, clearly define the place where you install your dishwasher. It is important to consider that this is not ordinary cabinet furniture that can be moved as you like. It is necessary to correctly tie the machine to power supply systems, supply and drain of dirty water.

Modern kitchen sets necessarily take into account the possibility of installing household appliances. The instructions for the kitchen set indicate the types of fastenings and brands of dishwashers that can be installed. The use of standard dimensions of mounts makes it possible to facilitate installation. If the fasteners do not match, then there is the opportunity to rearrange them. The most important thing is to correctly measure the niche under the dishwasher, and then, when buying, focus on these dimensions so that the machine fits inside the niche.

Important! There should be a well-grounded Euro outlet next to the dishwasher. The use of conventional outlets for connecting a dishwasher is unsafe.

to contents ↑

A set of tools and materials for connecting a BOSCH dishwasher

To connect the dishwashing equipment, you will need:

1. ¾ inch threaded tee: bronze, brass or metal-plastic.
2. Filter designed for rough water treatment.
3. ¾ Inch Brass Ball Valve.
4. Siphon.
5. Straight and curly screwdriver.
6. Wrench.
7. Pliers.
8. Insulation tape.
9. Fum tape.
10. Construction level.

What else to consider when choosing tools and materials for connecting a dishwasher with your own hands:

• If the kitchen already has a connected washer, then you do not need to install a waste siphon.
• When buying a shut-off ball valve and a threaded tee, pay attention to the material of manufacture. If the parts are made of silumin, the tap or tee can leak quickly.
• If you placed the dishwasher at a considerable distance from the sink and the special connecting tube will not be enough, you will need an additional tube made of metal-plastic.

Important! Those who purchase a dishwasher for the first time need to understand the special tools for its maintenance and operation. We collected all the useful information in our separate posts:

• Dishwasher salt.
• Dishwasher Powder.
• Dishwasher tablets.

And in order to save money, you can experiment and use the recipes of experienced housewives to makedo-it-yourself detergent for a dishwasher.

Now - step-by-step instructions for connecting to communications.

to contents ↑

Connection to the drain:

1. Replace the siphon located under the sink with another one equipped with an additional drainage system. Follow the link to find out how to choose the right one. dishwasher siphon.
2. Push the drain hose onto the fitting so that there is no kink at the junction of the drain and siphon. If kink is formed, this can lead to blockage and failure of the device.
3. Set the lower knee deeper, with a short bend. This will prevent unpleasant odors.

Important! Drain can be connected to the sewer, and to the siphon, which is located under the sink.

to contents ↑

Connection to the water supply system

How to connect a dishwasher with your own hands to the plumbing system?

1. Shut off the water supply.
2. Disconnect henka mixer, remove the old waterproofing.
3. Connect the tee to the pipe. Then attach the mixer, filter, shut-off ball valve and machine connecting pipe to it.
4. Seal each of the joints carefully with a fum tape (it is wound in 15 layers).
5. At the end of the installation, re-check the location of the hoses to avoid overloading and twisting.

Important! Experts advise connecting the dishwasher to a pipe supplying cold water, since its quality is much higher than that of hot water.

to contents ↑

Mains connection

Some points of connection need to be solved even before you decide to install the dishwasher in the chosen place. Since the sockets are located above the working surface, it is necessary to make the tap of the cores and connect an additional outlet in a convenient place at a height of 0.5 m from the floor. It is important to consider the following:

• When connecting a dishwasher, do not use an extension cord.
• Do not connect the electric stove and dishwasher to the same outlet.
• The outlet for the dishwasher must be equipped with splash protection.

Important! On our portal of useful tips you will find instructions for dishwashers of famous brands that will help you understand the details of operating the equipment:

• Dishwasher Virpul.
• Hans Dishwasher.

to contents ↑

The final stage

After the unit is connected, check it for stability using the building level. You can level the machine using the adjustable legs. This will make it possible to avoid unnecessary vibration.

Important! Perform a test run of the machine. Check for leaks, evaluate the speed of dialing and draining water, drying dishes. If the unit is operating normally, it remains to fix it to the box using self-tapping screws. Do not forget to read the instructions and our separate review. “How to use a dishwasher?”.

to contents ↑

Stock footage

Now you know how to install a BOSCH dishwasher yourself. This can be done without problems and difficulties, if you strictly follow the step by step instructions.